Liquid Polish

WALL SYSTEM BOTH

⚠ Not for floor application

Premium trowel-applied decorative plaster system delivering artisanal depth, tonal movement, and surface variation for luxury residential, hospitality, and high-specification architectural interiors.

Liquid Polish occupies the intersection of craft and architecture — a premium trowel-applied coating system developed for spaces where the surface itself is an integral component of the design intent, not merely a background. Applied in successive layers by specialist trowel technicians, each installation develops its own inherent depth, tonal movement, and surface variation. The finish reads differently under different light conditions: luminous in natural light, warm and dimensional under artificial illumination. No two applications are identical — the finish is, by nature, singular. Specified for luxury residential commissions, boutique hospitality, high-end retail, and cultural institutions where a mechanically uniform appearance would be architecturally insufficient. A colour-matched mockup approval process is required prior to full installation.

System Highlights

Fair-faced concrete artistic effect UV and stain resistant Highly flexible anti-cracking Water repellent system Protects against chloride ion corrosion Prevents concrete carbonation 15+ year lifespan Interior and exterior application Low VOC and low formaldehyde Easy installation and maintenance Eco-friendly water-based formula

System Specifications

Density	1.40-1.60 g/cm3
CSI Spec	09 96 00 / 09 96 07
Waterproof	4/5 High
Surface Dry	1-6 hrs depending on layer
VOC Content	Low VOC
Product Type	Silicate cement decorative wall coating
System Build	Primer -> Base Coat -> Main Paint -> Top Coat (ext)
Anti-Cracking	5/5 Excellent
UV Resistance	5/5 Excellent
Suitable Areas	Interior/exterior walls, decorative facades
Total Thickness	~1 mm
Finish Character	Fair-faced concrete artistic effect
Stain Resistance	5/5 Excellent
Expected Lifespan	15+ years
Application Method	Trowel (main paint), roller/spray (primer, base, top)
Curing Temperature	5-40 C
Main Paint Coverage	0.7-0.8 kg/m2
Suitable Substrates	Cement/putty (28+ day cure, pH < 10, moisture < 10%)
Acid Rain Resistance	4/5 High

Gallery

Common Questions

What is Liquid Polish used for? +

Liquid Polish is a trowel-applied decorative coating for feature walls and premium interior surfaces.

Is Liquid Polish suitable for exterior use? +

Liquid Polish is primarily an interior system. An exterior-rated topcoat option is available for protected exterior applications such as covered facades.

What gives Liquid Polish its distinctive look? +

Each Liquid Polish installation is unique because trowel technique, pressure and timing vary during application.

What is the coverage rate for Liquid Polish? +

The main coat applies at 0.7-0.8 kg/m2. The full system includes a primer, base coat, main coat and topcoat.

How long does Liquid Polish take to cure? +

Liquid Polish reaches full cure in 7 days. Dry to recoat between coats is 4-8 hours.

System Build

Topcoat

0.125 kg/m²

Main Coat (x3)

0.7–0.8 kg/m²

Base Coat (x2)

0.25 kg/m²

Primer

0.125 kg/m²

Substrate

Tools Required

Roller

Steel Trowel

Sandpaper

Full Cure

7 days at 23 ± 2°C

Step-by-Step Guide

STEP 1

Surface Preparation

Substrate must be cured minimum 28 days. Surface must be firm, dry, clean, and free from sand, dust, rust, and oil. Moisture content must be less than 10%, pH below 10. Fill any cracks with anti-crack mortar. Ambient temperature 5-40 C, humidity below 85%.

STEP 2

Primer Application

Apply 1 coat of special penetrating primer evenly on the prepared surface using a short-hair roller or spray equipment. Coverage: 0.125 kg/m2. Touch dry 1-2 hours, hard dry 2-3 hours.

STEP 3

Base Coat

Apply 2 coats of colour base coat using a roller brush at 0.25 kg/m2. Allow 4-6 hours drying between coats. After drying, sand with 400-grit sandpaper for a smooth surface.

STEP 4

Main Paint (Liquid Polish)

Apply 2-3 coats using a stainless steel trowel at 0.7-0.8 kg/m2 per coat. Apply first coat in random pattern, scrape surface with trowel after drying for texture. Each coat must be fully dry (6-10 hours) before applying the next.

STEP 5 (OPTIONAL)

Top Coat (Exterior Only)

For exterior applications, apply 2 coats of water-repellent top coat at 0.125 kg/m2 using roller brush. Allow 4-6 hours drying between coats. This provides UV protection and waterproofing.

STEP 6

Post-Application Care

Clean finished surfaces with water or mild detergent only. No acid-based products. Exterior top coat touch-ups every 2-3 years. Sealant reapplication every 3-5 years for exterior. Annual inspection recommended.

CSI Section	09 96 00 -- High-Performance Coatings
CSI Number	09 96 07
Product Type	Silicate cement decorative wall coating
Application Areas	Interior / exterior walls, decorative architectural finishing
System Build	Primer -> Base Coat (2) -> Main Paint (2-3) -> Top Coat (exterior)
Total System Thickness	~1 mm
Primer Coverage	0.125 kg/m2 (8 m2/kg)
Base Coat Coverage	0.25 kg/m2 (4 m2/kg)
Main Paint Coverage	0.7-0.8 kg/m2 (1.25-1.4 m2/kg)
Top Coat Coverage	0.125 kg/m2 (8 m2/kg) -- exterior only
Density	1.40-1.60 g/cm3
pH	8.5-9.5
Viscosity	45-65 centipoise at 25 C
VOC Content	Low VOC
Formaldehyde	Low
Curing Temperature	5-40 C
Surface Dry Time	1-2 hrs (primer), 2-3 hrs (base), 4-6 hrs (main paint), 2-3 hrs (top coat)
Full Dry Time	2-3 hrs (primer), 4-6 hrs (base), 6-10 hrs (main paint), 4-6 hrs (top coat)
UV Resistance	5/5 Excellent
Stain Resistance	5/5 Excellent
Anti-Cracking	5/5 Excellent (highly flexible)
Waterproof	4/5 High (water repellent)
Acid Rain Resistance	4/5 High
Chloride Ion Protection	4/5 High
Aesthetic Effect	5/5 Excellent (fair-faced concrete look)
Expected Lifespan	15+ years
Packaging	20 kg and 5 kg buckets (20L/bucket)
Storage Temperature	1-35 C (cool, dry, avoid freezing)
Substrate Requirements	Cement/putty, cured 28+ days, moisture < 10%, pH < 10
Warranty	3-5 year manufacturer guarantee
GHS Classification	Not classified as hazardous

Common Questions

What is Liquid Polish used for? +

Liquid Polish is a trowel-applied decorative coating for feature walls and premium interior surfaces.

Is Liquid Polish suitable for exterior use? +

Liquid Polish is primarily an interior system. An exterior-rated topcoat option is available for protected exterior applications such as covered facades.

What gives Liquid Polish its distinctive look? +

Each Liquid Polish installation is unique because trowel technique, pressure and timing vary during application.

What is the coverage rate for Liquid Polish? +

The main coat applies at 0.7-0.8 kg/m2. The full system includes a primer, base coat, main coat and topcoat.

How long does Liquid Polish take to cure? +

Liquid Polish reaches full cure in 7 days. Dry to recoat between coats is 4-8 hours.

Caesar Stone

Dante Orange

Deep Marine

Lime Mist

Millenium Pink

Neptuna

Roman Clay

Urban Gray

Welsh Green

View all Liquid Polish finishes →

Taguig, Philippines

Cosma

Boutique commercial fit-out in Bonifacio Global City, Metro Manila -- TechStone...

Care & Maintenance

Recommended care procedures to maintain appearance and performance of your Liquid Polish installation.

Daily Cleaning

Dust with a soft dry cloth or microfibre duster. For fingerprints or light marks, use a damp cloth with pH-neutral soap and buff dry.

Stain Removal

For stubborn marks, use a mild non-abrasive cleaner. Apply to a cloth first, not directly to the surface. Wipe in the direction of the texture pattern.

Polished Finish Care

The high-gloss finish is achieved through the topcoat. Avoid scratching by using felt pads under decorative objects. Do not place hot items directly on the surface.

Annual Maintenance

Inspect the topcoat for micro-scratches or dulling annually. A light recoat of the clear topcoat can restore the original lustre. Contact your certified applicator.

Avoid

Do not use abrasive cleaners, scouring pads, or ammonia-based products. Avoid dragging objects across the polished surface. Do not apply furniture wax.

Technical Data Sheets

Product specifications, coverage rates, and system layer details.

Liquid Polish Technical Data Sheet

Safety Data Sheets

Health, safety, and handling information for each component.

Liquid Polish Safety Data Sheet

Installation Guides

Step-by-step application procedures and best practices.

Liquid Polish Application Guide

Specifier Kits

Comprehensive specification packages for architects and engineers.

Liquid Polish Product Specification

Application Videos

Coming soon

At a Glance

CSI Section	09 96 00 -- High-Performance Coatings
CSI Number	09 96 07
Product Type	Silicate cement decorative wall coating
Application Areas	Interior / exterior walls, decorative architectural finishing

Available Colours

Documents

5 documents available for this system.

Want to specify this system?

Specify TechStone

Try Before You Specify

Request a physical colour sample delivered to your office or project site.

Request a Sample

✓

Sample request sent!

We'll be in touch within 1 business day.

Name *

Email *

Phone

Company

Preferred Contact Method

Email Phone Viber

Additional notes

We'll respond within 1 business day. Your information is kept private.

Site Visit

Schedule a consultation or on-site demonstration with our technical team.

Book a Site Visit / Appointment

✓

Appointment request sent!

We'll be in touch within 1 business day.

Name *

Email *

Phone

Company

Project Area (m²)

Preferred Date

Site Address

Message

We'll respond within 1 business day. Your information is kept private.

Other Systems

Brushed Illusion →

Liquid Granite →

Opus →